BTW - folgendes hab ich vor ein paar Tagen im Netz gefunden zum Thema FIXING NAV UPGDRADE FAILURE
evtl. lässt sich dein alter Rechner ja wieder zum leben erwecken...
This will require a service technician with access to a DIS or MoDiC tool to
perform.
A configuration signal is required to allow the nav computer to load the correct
software for its respective application. This is generated by using DIS coding
program "Coding ZCS C24.0" and the Navigation System operating software CD:
1. Connect DIS/MoDiC 3 tester to vehicle
2. From the DIS Coding/Programming select "1 ZCS Coding"
3. Select appropriate engineering series (E38, E39, etc.)
4. Select "4 conversion"
5. Select "3 IKE/Kombi"
6. Select "2 Language"
7. At prompt "Is the CD-ROM present?" - select "Yes", but do not insert CD into
the Nav Computer yet!
8. First select the main language and then an additional language (the choices
are: English, French, Italian, Spanish, German)
9. Select announcer's voice gender: male or female
10. After activation of the automatic coding, the DIS tester tells you to follow
the instructions on the monitor for CD installation
11. Place the CD in the navigation computer CD drive Important: Do not switch
ignition OFF during software loading procedure. Do not use any other Nav
Software CD's except CD.
12. Once loading has been completed, remove the CD and then confirm completion
by pressing the rotary push-button on the monitor
13. Turn ignition OFF for 10 seconds, then turn it ON and conduct a functional
check
14. After this step has been finished, encode the navigation computer in the
regular manner using the path "1 Recoding".
|