Hi,
if you put the car on a ramp/car lift so you can stand under the car you can loosen the 2 nuts of the u-shape clamp on the rear anti-roll bar.
the u-shape clamp is attached to a metal rod that goes to the LAD valve on the side of the differential.
if you pus the ord forward or backward the suspension will move up or down. move the rod a little bit until the suspension is high enough. then tighten the 2 nuts of the u-shape clamp again.
it takes a couple of times to get the suspension right because it moves up and down quick when you move the rod just a little bit.
do not adjust the rod when the car is standing on the road because the car can crush you if it moves down too far.
|