Hast Recht, der halt wohl nur die Sitze getauscht ohne Memory, hier der Text:
I had that problem on my comforts when I swapped them left to right. I just reversed the wires at the switch. Not sure if that's a solution for memory seats though.
------------
I now remember that it wasn't the switch wires but the wires to the motors that I reversed. I didn't have the little tool to pull the pins out of the connectors so I just cut the wires and swapped them. There's a nifty little tool available that will allow you to pull the round pins out of bmw connectors. Anyway it was only the seat base motors that I needed to reverse. The back worked fine.
|