Einzelnen Beitrag anzeigen
Alt 29.01.2005, 19:36   #1
Erich
Shogun
 
Benutzerbild von Erich
 
Registriert seit: 19.07.2002
Ort: Joso
Fahrzeug: E32 750iL 11/88
Standard Verdrehte Rückenlehne oder twisted seat back

Hier die Beschreibung von BillR (auch bekannt als Rainman auf roadfly) wie er ein Kundenfahrzeug repariert hat.
-----------------------
It was the cable that drives the recline mechanism, I just did the usual, remove the e14 torx bolts holding the seat track down in the back of the floor, tilt the seat up 20 degrees from the back and slide it forward off the hooks in front, then tilt the front of the seat up and lay the back of the seat down on the back seat so I can get under the seat to the drive motors. The second motor back from the front controls the recline mechanisim. I unbolted the cable from the passenger side, hooked a drill up to the cable and spun it until the seat was even. Then i pulled the cable out of the housing, pulled the end off the housing and cut just under a 1/2 off the housing length, put it back together so now the drive cable sticks out of the housing further and reassemble. Seat now works fine...


Externer Link (&Ooml;ffnet in neuem Fenster, der Forumsbetreiber distanziert sich vom Inhalt extern verlinkter Seiten.) http://www.lehrmangroup.com/rickard/

----------------------------
und hier von Gale
Externer Link (&Ooml;ffnet in neuem Fenster, der Forumsbetreiber distanziert sich vom Inhalt extern verlinkter Seiten.) http://www.nmia.com/~dgnrg/page_2.htm
Weitere Details hier unter seat back twist

Geändert von Erich (27.04.2011 um 14:07 Uhr).
Erich ist offline   Antwort Mit Zitat antworten